Repossi recommends that you select 1 (one) size bigger than your usual size. For instance, should your usual size be 52, select size 53. Should you not know your usual size, please refer to Repossi sizing guide.

Creation: This collection is composed of 2 melted or manufactured rings connected by a barrette. The bezel is adjusted for each pear and soldered to the shank. The bar is slightly embedded in the ring to strengthen the whole while being over thickness. The rings are "cradled", rounded on the inside to increase the aesthetic and comfort of the wearer.

Paving/Setting: The diameter of the stones must be very precise. The lines must be perfect. They are positioned on different plans but with the surfaces in the same way so that the light reflects. The claws holding the diamond have a very peculiar shape, with flat angles to reflect the light better (called “bec d´aigle”). The bezel has a specific shape: Eiffel tower bezel with only 3 claws. The metal is very lightly visible, giving an impression of a "floating diamond". The position of each stone is essential, and a lot of attention is given to it. Each grain must be made in a consistent way and positioned coherently to the paved stones on the same line with precision so that the light is reflected correctly.

Polish: This is an essential step as it is more difficult to polish square shapes as compared to round shapes. The shape of the rings must not be deformed, with sharp and tense angles.

Assembly: The position of the bezel on the ring is carefully studied so that once worn, the diamond is perfectly positioned between the fingers.